Select your site:
International
Typically commercial environments are exposed to greater environmental impacts, whether they be through the usage of the environment, the height of the building or the physical environment and weather. For these reasons DGL recommends higher standard products for use in these conditions based on the AAMA standards. These products are designed to withstand different conditions, provide protection and offer a superior performance which will protect your asset in a variety of environments.
To help in this process we utilise:
*DGL products that meet just AAMA 2603 and AS3715 are supported for DGL Alumi Shield™ warranties on interior applications on commercial projects when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions
The following table can be used to help identify the product choice you have for the interior use of DGL Premium Powder coatings on your commercial project.
For interior applications of powder coatings in commercial buildings close to liquids, e.g. swimming pools, fountains, bathrooms etc., please refer to the guidance below to understand your product choice and the warranty limitations in these environments.
The following table can be used to help identify the product choice you have for the exterior use of DGL Premium Powder coatings on your commercial project.
● Alumi Shield™ warranties are available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder products are NOT suitable in strongly acidic or caustic environments so PH must be >5 and <9.
1. Fluoroset may be suitable in locations <10m from the high tide line e.g. harbours (contact DGL for advice)
2. Electro and Duratec are only suitable for coastal environments >10m from the high tide
For buildings that have exterior powder coated assets close to liquids other than the sea, e.g. outdoor swimming pools, fountains, outdoor bathrooms etc., please refer to the guidance below to understand your product choice and the warranty limitations in these environments.
1Please note chemically treated water includes antimicrobial treatments, e.g. in pools, anti-corrosive chemicals, and soapy water in bathrooms and showers.
■ Where indicated Alumi Shield™ warranties are available on areas >than 2m from the liquid (ie outside the splash zone).
● Where indicated Alumi Shield™ warranties are available any distance from the liquid.
Alumi Shield™ warranties are only available when applied by a DGL Accredited Powder Coater to the warranty specification on recommended project types and conditions.
All DGL powder product are NOT suitable in strongly acidic environments so PH must be >5.
Alumi Shield™ warranties are not available if the powder coating is immersed in any liquid.
